How To Connect Wireless Camera To Mac

I am writing this tutorial considering of the lack of available back up for Apple tree Mac OS X users like myself who are interested in setting up an Like shooting fish in a barrel Northward Tech branded IP cameras for external access. The fact that the software included (if the installation disc works in the first place) with these IP cameras are Windows-merely does not assistance and the included instructions are written in poorly translated English language tend to add together to the frustration during the setup process for folks who are non experienced with setting up IP cameras.

The included software, IP Photographic camera Direction Software, is quite versatile and offers a plethora of features and extra configuration options that is only accessible on a Windows computer. If you have Parallel Desktop, consider using this program.

These cameras are by and large built past Shenzhen Technology Co., Ltd. of Prc simply are cross branded in different markets equally Easy N Tech, Foscam, Wansview, Apexis, Hootoo and Asagio. I prefer Easy North Tech line of IP camera for several reasons:

• Easy to set-upwardly
• Reliable
• Cost effective (you can purchase a brand new IP camera starting at $forty.00 from Amazon.com – links below).
• Easy to use and functional features

If yous are reading this, I am assuming you've run across this page searching for IP cameras and Mac Os X setup or configuration help. You've come to the correct page. After setting up my first indoor Like shooting fish in a barrel N Tech F-series IP camera, I've developed plenty knowledge to setup subsequent cameras with ease, including an outdoor Agasio branded M105I surveillance IP photographic camera. The gear up is straightforward and easy. As you lot read my tutorial, proceed in mind that I am writing it base on my own ISP (Time Warner Cablevision), my own router (Motorola and 1st gen Apple tree Fourth dimension Capsule) and Mac OS Ten Mount Lion 10.8.x. Yous may need to accommodate this tutorial to work on the specifications of your LAN / WAN and router settings.

For this write-up, I volition demonstrate how to setup and configure two IP cameras. One is an F-Serial indoor pan and tilt camera. The other is an outdoor weatherproof M105I series IP camera. Both are fabricated by Easy N Tech.

Initial Setup

The initial setup is probably one of the most disruptive and frustrating step. Configuring the IP photographic camera for wireless access is by far, the near confusing and frustrating step co-ordinate to full general consensus. After you've unpacked the IP camera, connect the IP camera to your router via an Ethernet cable, and and then plug in the Air-conditioning adapter into a wall outlet and connect it to your IP camera. If you take the pan and tilt model, information technology should kicking-upwards and swivel around for about thirty seconds. If you have an outdoor model, it's most likely fixed-position so it volition not move. Once the IP camera is ready for use, you lot will see the array of Infra Red LED glow faintly – this is normal and this is how the photographic camera capture low light videos at night.

Identifying the IP Photographic camera'southward IP address and MAC address

Since the IP camera has a built-in web server enabled for access to its web-based user interface, y'all'll demand to find out its IP accost assigned by your DHCP server in your router. There are several ways to accomplish this.

1. If yous know how to access your DHCP customer list in your router's admin backend, you can pull that information from there. Depending on your router, information technology may or may non display the IP Camera's MAC address – which you lot may need to connect to your network. Come across notes on Access Command List below.

   

   Identifying your IP Photographic camera'south IP address through your router admin page. In the above case, I reserved the IP addresses for the IP Camera. Equally you can run into, the last ii rows are IP addresses for the Agasio M105I – ane for Ethernet connection (ending in 15 and marked as inactive) and one for WiFi connectedness (ending in 11)

2. Y'all can use the included "Search IP Camera" software on a separate and available  Windows machine that'due south connected to your LAN and scan for the IP Photographic camera (downloadable at http://world wide web.easyn.com/download/Search IP Camera.exe). Information technology volition return both an IP and MAC address associated with the IP Photographic camera. This will not work with Parallel Desktop since Parallel Desktop volition self-assign an IP accost for Windows running on your Mac, making it inaccessible to your LAN.
3. Y'all can download an IP address scanner called IP Scanner for Mac past 10base-T Interactive at CNET. It's a shareware app that scans upwards to six devices and written report its IP accost every bit well as MAC (media admission command) address. If you lot take less than half-dozen devices continued to your network, yous should be able to identify the IP camera easily. If y'all take more than than half dozen devices, yous may need to keep scanning until yous run across an IP accost that you practice non recognize.

Running IP Scanner for Mac to identify IP and MAC addresses for your new IP Photographic camera.

Once you've identified the IP Camera, write down its MAC address and IP accost. You are now ready to access the IP Camera'southward built-in web server and web-based user interface.

Proceed in mind that the MAC address you are writing downward at present is the Ethernet MAC address. There is a separate MAC accost when it comes time to setup your IP photographic camera for wireless connection.

A Note on Network Admission Command Lists

If your network is configured for secure access, you may have Admission Control List enabled. If yous do, yous may want to temporarily disable it for the duration of the IP Photographic camera fix procedure, or you can add together the MAC address of the IP Photographic camera to your Access Control List.

For those that do not know what an Admission Command List is, it's simply a list of MAC addresses of devices that has permission to connect to your network. If your device's MAC accost, say your iPhone or MacBook Air, is not on the Access Control Listing, then information technology will non be able to connect to your network. For advanced routers and switches, you can configure timed access of devices base on their MAC address. If you lot're not sure, chances are it is not enabled. If you're not administering your own network, yous might want to check with whoever's in charge.

Accessing the IP Camera's web-based User Interface

So now you've identified the camera's LAN IP address. Punch it into your spider web browser, followed past :81 (port 81). For some strange reason, Piece of cake N Tech decided to make the web server port 81 instead of the standard port fourscore. For instance, my IP Camera's IP address was assigned 198.168.0.xi by my router, I would type in http://198.168.0.xi:81 on my web browser.

After doing so, you lot will be prompted to enter your login credential. The default username is "admin" and the password is blank. Yous should double bank check the bottom of the camera of the box that the camera was packaged in. At that place is a silvery sticker that will indicate the log-in credentials:

Accessing the IP Photographic camera's internal web-based UI via Firefox

Enter your credentials and printing Enter to go along.

The Web-based User Interface

At a glance, this is what the splash folio of the web-based user interface looks similar:

The IP Camera'southward web-based UI splash page

Unfortunately for Mac OS X users, only the second option works. The kickoff selection has the most features but require the use of Internet Explorer. For the sake of comparison, hither is what the ActiveX manner vs. Server Push button Style look similar:

Photographic camera view in Server Button Mode for Mac Os X users

Camera view in ActiveX Way under Net Explorer

Spider web-based UI in Server Push button Mode for Mac OS X users.

Web-based UI in ActiveX Mode under Internet Explorer

The main difference is that nether ActiveX Mode y'all can command multiple IP cameras (upwards to 9) nether one setting and take the power to tape video and communicate through the IP cameras' speakers via a microphone.

Configuring the Web-based User Interface

Start thing you lot desire to do inside the web-based UI is ready upwardly the network parameters. The IP Camera allows yous to do this in 2 fashions:

• Obtain an IP address automatically through your router's internal DHCP server (default)
• Manually assign a static IP address for the IP Camera. This method is for advanced network users and require that y'all enter the following information:
  • IP Address
  • Subnet Mask
  • Gateway
  • DNS Server

For this tutorial, I volition keep things uncomplicated. Click on the "Bones Network Setting" link on the left navigation menu and cheque the box marked "Obtain IP from DHCP Server."

Click on "Basic Network Setting" to configure the photographic camera'south IP address

In the same screen, y'all tin also reassign the port on the IP Camera that opens up the web UI. The default mill port is 81. Yous tin can keep it at that simply for security reason, let's modify the "Http Port" from 81 to 123 (you can change it to whatever number y'all want). Click on Set to utilize the changes. Your camera will reboot itself. If you changed the port number, so you will need to enter the new port number later on the IP Camera's IP address. Then in the initial setup, we admission the web-based UI at http://192.168.0.11:81. Since we changed the Http Port setting to 123, you lot'll need to punch inhttp://192.168.0.11:123 to resume access. Exist sure to wait xxx seconds for the camera to fully reboot itself before proceeding.

Alias Settings

If you would like to rename your IP Camera to something more than task designated, click on "Allonym Settings" and enter a new proper name. My Agasio M105I outdoor IP camera was purchased to monitor my Sulcata and Carmine Foot tortoises, so I named the photographic camera "TortCAM" every bit follow:

Renaming your IP Camera

User Settings

You'd definitely want to change the administrator credentials so that your IP Camera is not public domain. Click on "User Settings" to make changes to the access level. You tin change the username, password and access levels here.

User Settings and access levels

There are three admission levels:

• Administrator – complete admission to the web-based UI and complete control of the IP Photographic camera.
• Operator – no access to the web-based UI and limited control of the IP Photographic camera (i.due east. pan, tilt, zoom if your IP camera is equipped with these features).
• Company – no admission to the web-based UI and no control of the IP Photographic camera. This access level is "read only", or "spotter just". Perfect if you lot have a camera set on your pets and want your friends, family unit or co-workers to watch.

Post Service Settings

You can configure your IP Camera to send email. If configured properly, the IP Photographic camera volition email you its external URL upon boot-up and if y'all set the camera to enable alarm with email notification, the IP Camera volition utilise your email setting to send you electronic mail with six screenshot of effect proceeding the effect that triggered the alert. Click on "Mail Settings" to make changes to the email settings.

Configuring your IP Photographic camera to ship e-mail

The parameter for Mail Service Settings is pretty straightforward. You can utilize whatsoever SMTP server to transport email equally long as they take email relays and you tin can authenticate with the approachable server.

• Sender: This is the electronic mail address that volition announced in the "FROM" field of the email.
• Receiver: You can add up to four email addresses to which the IP Camera will e-mail to.
• SMTP Server: This is the outgoing email server (i.eastward. mail.gmail.com).
• SMTP Port: This is the SMTP'due south communication port, default is 25.
• Transportation Layer Security Protocol: If SSL connection is required, you lot'll need to select a compatible protocol.
• SMTP User: This is your username (commonly your total email accost).
• SMTP Password: This is your SMTP email countersign.
• Report Internet IP by Mail: If checked, whenever the IP Camera boots up, it will ship you lot its public URL to the email addresses under the Receiver # field.

Once you've entered all the parameters, click on Set and then click on Test. If the IP Photographic camera was able communicate with the SMTP server you lot've specified, it will report "Test Succeeded" and send you an e-mail of its public URL. If non, and so information technology volition betoken that the "Exam Failed". 1 or 2 parameters is either incorrect or omitted.

FTP Service Settings

In social club to have the IP Camera have screenshots and save it to a difficult drive, either due to triggering the motion detector or considering the Scheduler was configured, an FTP server and folder must be entered. Click on "FTP Service Settings" to continue:

Configuring the IP Camera to admission an FTP server to store screenshots

The parameters, just like the Email Service Settings, is pretty straightforward:

• FTP Server: domain or IP address to your FTP server.
• FTP Port: default is 21. Change this to the correct port # if your FTP server operates out of port 21.
• FTP User: Your FTP username.
• FTP Countersign: Your FTP password.
• FTP Upload Folder: The folder to relieve your screenshots.
• FTP Mode: Default is PORT, usually not necessary to change. If you lot experience connectivity problems, try selecting PASV.
• Scheduler: Allows you to tell the camera to schedule a block of fourth dimension to begin taking screenshots and uploading it to the FTP Upload Binder.

Once you're satisfied with the FTP settings, click on Ready and the click on Examination. If the IP Camera was able log on to the FTP server with your FTP credential, information technology will report "Exam Succeeded" and upload a screenshot filed (*_test.jpg) to the FTP Upload Folder. If not, then it volition indicate that the "Examination Failed". One or two parameters is either wrong or omitted.

Alarm Service Settings

With the Easy N Tech brand of IP cameras, y'all tin configure your IP Photographic camera to begin taking screenshots and/or videos when its motility detector is triggered. You can either plow on or turn off the motion detector or you can schedule a block of date and time in which the movement detector is activated. For example, if you're going to be away from your residence from Mon to Friday from 9am to 4pm, you can configure the IP Camera to actuate its motility detector just during these fourth dimension blocks. To get started, click on "Warning Service Settings":

Alarm Service Settings

The parameters for Alert Service Setting is a bit more advance, but manageable:

• Motion Detect Armed: Turns the built-in motion detector ON or OFF.
• Motion Detect Sensibility: Allows you lot to point how sensitive the motion detector becomes. From 1 to 10, 10 being most sensitive. The higher the number, the higher the number of simulated-alarms you'll get (i.e. a fly, contrasting lights, moving shadows will trigger the motility detector).
• Start the movement detection bounty: This tells the IP Camera to ignore contrasting lights.
• Alarm Input Armed: This field is optional and your IP Photographic camera may or may not have this feature. If checked, an external motion detector or alarm trigger is connected to the IP Camera'south input/output alarm pinouts.
• IO Linkage on Alarm: This field is optional and your IP Photographic camera may or may not have this feature. When checked, this pick indicates that you have an external output, such as a loud speaker or a siren, that will be activated when the external motion detector is activated.
• Send Mail on Alarm: If checked, the IP Camera will have vi screenshots seconds after the result that triggered the motion detector and send it to the recipients indicated in the Mail Service Settings. Yous need to configure the Post Service Settings in order for this to work.
• Upload (FTP) on Alarm: Upon triggering the move detector, the IP Camera will begin taking screenshots and upload information technology to the FTP Upload Folder. Here, you tell the IP Photographic camera how long to wait in seconds before taking consecutive screenshots.
• Scheduler: You can assign a block or a range of fourth dimension and twenty-four hour period combination to enable the move detector. It is very cumbersome but information technology works equally configured.

Once you've configured the Alert Service Setting, click on Prepare. The IP Photographic camera will reboot itself, taking upward to 30 seconds. The motion detector will arm itself 30 seconds after the photographic camera has booted upwardly to give y'all time to evacuate the premise (and avoid false alarms).

Here is a screenshot of my FTP Upload Folder with screenshots taken by the IP Camera. As you lot can run across, my Sulcata tortoise went trigger happy:

FTP Upload Folder content example

I recall I've pretty much covered all yous need to know in order to configure the spider web-based user interface and begin enjoy using your IP Camera via your local area network. For avant-garde topic, such as port forwarding for remote access (i.due east. viewing your IP Camera from your work or through mobile) and setting up the IP Camera for wireless network connectedness, continue reading forrard.

Port Forwarding and External Access

In order to view your IP Camera while away from your local surface area network, you will need to know a couple of things. First, your Internet access provider controls what incoming connection is permitted. If your ISP does not allow you operating an FTP or spider web server, then your ports 80 and 21 will exist blocked off. Yous can featherbed this through network address translation (NAT) by changing the public port to your IP Photographic camera from port 80 to something obscure, which you should anyways for privacy and security reasons. You will also need to know what your public Internet service provider assigned IP address is. Your public Internet service provider assigned IP accost differs from the DHCP-assigned IP address from the fact that information technology is public and can be accessed by anyone from anywhere in the world (if they know your public IP address that is). Your DHCP-assigned IP address is local and private and can simply exist accessed if y'all're on the same local area network. You can detect out your public IP address by visiting http://whatismyipaddress.com.

In one case y'all have this information, y'all'll need to select a public port to assign to the IP Camera. If your public ISP assigned IP address is 123.456.789.012 and we've already assigned it port 123 in the initial setup, you'll need to punch in http://123.456.789.012:123 in your web browser. But before you can do that, you demand to configure your router and instruct it to forrad the PUBLIC port and map information technology to the IP Camera in your Individual local expanse network. This process depends on what router you are using. I'll illustrate this on a Motorola SURFboard cable modem / router and a start generation Apple Time Capsule with built-in AirPort Express.

Port forwarding on a Motorola SURFboard

In your router administration folio, y'all can normally notice the port forwarding page either in the Advanced section, NAT section, Port Mapping or simply Port Forwarding section. Y'all may need to consult the manual of your router or enquire for assistance on online support forums.

One time y'all are able to access your Port Forwarding page, yous volition need to configure the Individual IP address (i.eastward. Internal) to your IP Photographic camera's DHCP-assigned IP address (i.e. 192.168.0.11 in our example). Since we are using a custom port number of 123, ready the inbound port (or internal/incoming start-end port) to 123 and the outbound port (or external/approachable start-stop port) to 123. Make sure the blazon is either "Both" or "TCP". Salvage the configuration and reboot your router.

To exam it to see if you've successfully configured your router, punch in your public Internet service provider-assigned IP address followed past the port number and hit enter. In our example, this would be http://123.456.789.012:123.You should make it at your camera's login screen.

Setting up Port Forwarding on an Apple Fourth dimension Capsule

Assuming you have the latest AirPort Utility installed (version 7.6.i equally of this writing), this is a very general tutorial on getting your IP Camera prepare and mapped on your Airport device.

Open your AirPort Utility app and click on your Drome device and select Edit:

Setting up port mapping on an Apple AirPort device

Next, click on the "Network" tab and ensure that "DHCP and NAT" is selected nether the "Router Way" drop-down carte du jour:

Configuring DHCP and NAT

Click on the "+" button nether "Port Settings" to add a new port mapping / port forwarding configuration:

Port forwarding your IP Camera on an Apple tree AirPort device

The parameters are straightforward:

• Description: User-friendly description of the service being forwarded. "TortCAM" is used.
• Public TCP Ports: Y'all tin enter multiple ports separated by a comma or a range or ports. But in our example, we've already gear up the IP Camera to port 123. To proceed things simple, let's enter 123. You lot tin change this later on, or if y'all want your public access port to exist different than the IP Camera's internal port.
• Private IP Address: This is the DHCP-assigned IP accost that is assigned to the IP Camera. In our instance, this would be 192.168.0.11.
• Individual TCP Ports: Just like Public TCP Ports setting, since we've already set the IP Camera to port 123 let's enter 123.

Click on Update and let your Apple Drome device to reboot. To exam information technology to see if you've successfully configured your Apple Aerodrome device, punch in your public ISP-assigned IP address followed by the port number and hit enter. In our example, this would behttp://123.456.789.012:123.Yous should make it at your camera's login screen.

DDNS

If you have dynamic IP address, i.e. either y'all are on punch-upwards or on ADSL with a rotating IP address, yous may need to sign up for a dynamic DNS service. I recommend DynDNS.org equally I've been using their service for well over a decade and I'm truly satisfied with their uptime, service and support. Why would you need dynamic DNS? Two reasons. If you have a dynamic IP address, your public ISP-assigned IP accost volition piece of work one day and may not piece of work a few days (or even a few hours) later. The other reason is if you rather  access your IP Camera via a friendly name instead of an IP accost. Instead of punching inhttp://123.456.789.012:123 every time you lot want to view your IP Camera from remote, wouldn't it be nicer to simply punch inhttp://www.your-domain.com:123 instead? Yous can by signing up for an account and configuring the IP Camera'due south web-based UI appropriately. Once you've registered for an account on DynDns.org, click on "DDNS Service Settings" in your IP Camera'due south web-based UI:

Configuring DDNS Service

While I've recommended DynDNS, there are other dynamic DNS service provider that you lot can utilize which this IP Camera supports. You'll observe a list of them under the "DDNS Service" driblet-down menu. To keep things uncomplicated, we'll employ DynDNS. Under DDNS User and DDNS Password, enter your DynDNS username and countersign. In the "DDNS Host" field, enter the hostname you've selected upon registration at DynDNS. Click on Gear up and allow your IP Camera to reboot. You should now be able to access your IP Photographic camera remotely via your ain custom domain name, east.m. http://your-domain.com:123.

Configuring your IP Camera for Wireless Network Connexion

According to the general consensus (e.thou. from online reviews, online blogs, online forums, etc.) setting up the IP Camera for wireless connexion is the about confusing and difficult job. After experimenting effectually with the "Wireless Lan Settings" extensively, I've figured out a foolproof fashion to get your IP Camera continued to your WiFi network seamlessly, well, almost seamlessly. The thing to keep in mind when configuring your IP Camera for WiFi connectivity is:

Your router volition assign two individual IP addresses for your IP Camera – ane for Ethernet LAN connexion and one for WiFi wireless connection.

Pregnant if you established a LAN connection via Ethernet and want to switch over to wireless connection, you lot'll near likely won't be able to access the IP Photographic camera with the LAN-issued IP accost. I believe this is the main reason, if not the sole reason why a lot of people have such a hard time getting the IP Photographic camera to connect to a wireless network. As well keep in listen that the IP Camera just supports 802.11 a/b/g standard at 2.4 ghz only. Not a problem with newer routers or dual-band Apple tree Aerodrome devices. Then with that in mind…

The start matter you need to do is connect the IP Photographic camera to the LAN via Ethernet and configure your camera for LAN access. Basically if you've got your IP Cam upwardly and running past post-obit the preceding instructions above or through your own mean, yous're set to become wireless.

So back to the setup procedure, in one case you get your IP Cam up and running on the LAN, go to your IP Cam's spider web UI and click on "Wireless Lan Settings" on the left navigation carte to configure the IP Cam for wireless admission.

Wireless Lan Settings

• Make certain the "Using Wireless Lan" box is checked.
• Under "SSID", enter your full wireless network name. Yous may click "Scan" multiple times until your wireless network shows up on the list (yous may need to browse upwards to 4 times before information technology appears) or y'all can simply type in the proper name of the SSID of your network (You will need to type in your network proper name if it's subconscious). If you accept Access Control List enabled, exist certain to add together the IP Cam's MAC address to the ACL.
• For "Network Blazon", select "Infra"
• Nether "Encryption", select your security type. Information technology'southward usually WPA2 Personal (AES), but again, y'all need to exercise the enquiry on your own network.
• For "Share Primal", blazon in your wireless network access countersign.

Click Set and permit the IP Camera to reboot (thirty secs). Side by side disconnect the Ethernet cable from the IP Cam and remove the AC adapter plug from the camera to power it off, then wait 30 seconds to ability cycle it. Reconnect the power supply only leave the Ethernet cablevision unplugged and wait another 30 seconds for the IP Photographic camera to kick up.

Now your IP Cam should be connected to your wireless network. Run IP Scanner 2.5 or above to find the newly assigned WAN IP address on the network (again, you lot tin can also find this information in your router'south DHCP client list via your router's admin folio); this should be the new wireless IP address for your IP Camera.

If the wireless IP address for the IP Camera is 192.168.0.12, then you'll demand to dial in http://192.168.0.12:123 to regain admission to the web UI – again, your Ethernet IP address for the photographic camera will usually no longer work. If y'all plan on a 100% wireless connection y'all'll need to reconfigure your port forwarding settings, reserved IP setting (if y'all did this for LAN), access port, etc. Continue with your WiFi configuration equally if y'all're configuring the IP Camera for the first time on LAN. That'due south information technology! That's all there is to it for wireless connectivity.

Where to Buy

Source: https://blog.machanon.net/2012/09/20/tutorial-how-to-set-up-and-configure-an-ip-camera-on-a-wired-or-wireless-network-with-a-mac-os-x-machine-easy-n-tech-foscam-wansview-agasio-apexis-hootoo/

Posted by: conleywaseve1964.blogspot.com

Share this post