How To Add Ip Camera To Reolink Nvr
How to Add Reolink IP Cameras to Reolink PoE NVR (New UI)
Applies to: All Reolink IP Cameras except battery-powered cameras
Reolink PoE NVR allows yous to tape videos for Reolink IP cameras without using a computer. To do that, you need to add the camera to the NVR outset. The cabling for PoE NVR is shown as below.
Hither is a video for your reference:
Y'all may follow the steps below to add Reolink cameras to Reolink PoE NVR.
Step 1. Connect your Reolink IP cameras to the Reolink PoE NVR. There're ii different ways of powering your IP cameras:
a. Power the IP cameras via the PoE NVR. You may connect the IP cameras to the PoE NVR direct via an Ethernet cablevision. (An Ethernet cable is also needed during the initial setup for WiFi cameras)
b. Power the IP cameras using a DC power adapter. For PoE cameras, you may connect the camera to the same router that the NVR is connected to; For WiFi cameras, select the WiFi of the router that the NVR is connected to.
Note: Make sure all the IP cameras you want to add together to the NVR are connected to the same network (LAN) as the NVR. Otherwise, the cameras won't be shown on the scanned list and cannot be automatically added to the NVR.
Footstep two. Log in to your NVR, and go to the IP channel.
Step three. Select Machine Add, and click Scan so that all the cameras in the aforementioned LAN tin can exist automatically shown on the listing.
Note: The number of cameras that can be added to the NVR may vary depending on the NVR aqueduct numbers of the NVR.
Step 4. If y'all have never changed the password of the IP cameras (the default password of the IP camera is blank) and there are plenty channels for all the cameras, you lot may press Apply to add all the IP cameras to the NVR.
However, if you have changed the login passwords of the IP cameras or there is no spare channel to display all the IP cameras, you may need to go through a few more steps.
Footstep 5. If you lot have inverse the User Name and the Password of your cameras, please click Change to input the required information.
Step 7. Click OK to salvage the configuration.
Also, here is a video for your reference to add WiFi cameras to PoE NVR:
Related articles
- Wiring Standard of Ethernet Cablevision
- How to Add together Reolink IP Cameras to Reolink PoE NVR
- Tin can I Mount Reolink Cameras to Ceilings or Walls
- Getting Started with Reolink Client (New Client)
- How to Add Reolink Products in LAN via Reolink Customer(New Client )
Source: https://support.reolink.com/hc/en-us/articles/900004670503-How-to-Add-Reolink-IP-Cameras-to-Reolink-PoE-NVR-New-UI-
Posted by: conleywaseve1964.blogspot.com
0 Response to "How To Add Ip Camera To Reolink Nvr"
Post a Comment